JSH2.5
Ratio 5–7JNM05 series motor with planetary gearbox, compact design; upper speed limit 20–55 r/min.
- Rated torque
- 1,000–4,000 N·m
- Motor
- JNM05
- Mounting pilot
- φ180f7
01Distributor
02Mounting flange
03Output pinion
Typical JSH configuration shown. Distributor and output pinion are selected to suit the duty.
Hydraulic drive · Mainly custom-built
JSH Series
Hydraulic Slewing Drive
An integrated slewing drive made up of a JNM hydraulic motor, planetary gearbox and output pinion. The pinion meshes with the slewing bearing to turn the upper structure or turntable. JSH3, JSH4 and JSH5 have a built-in brake. The distributor (with valves) and output pinion can be selected to suit the system flow and slewing bearing, and other sizes and configurations can be supplied to customer requirements.
- Catalog models
- 30models · 5 series
- Rated output torque
- 1,000–22,136N·m
- Ratio
- 5–35
JSH3, JSH4 and JSH5: rated pressure 16 MPa, static braking torque 2,520–39,000 N·m, maximum power 48, 96 and 160 kW respectively. JSH2.5 2.5 is the high-ratio (25–35) version, speed 0.2–20 r/min.
Technical data
JSH Series model data
Use the selection map to locate models by the torque and speed you need, then see the full data for that series in the table below. Outline views, mounting dimensions and output pinions are in each series' drawings.
Selection map
Each dot is one catalog model
N·m
r/min
Showing all 30 models
Horizontal axis: rated output torque, N·m, log scale.
Click any model on the map to see its data, or enter the torque you need.
Smallest models that qualify
Series
Unit
Filtered by selection map
| Model | Rated output torque (N·m) | Ratio | Speed range (r/min) | Total displacement (ml/r) | Hydraulic motor |
|---|---|---|---|---|---|
| JSH2.59 models · 1,000–4,000 N·m · ratio 5–7 | |||||
| JSH2.5-1000D60221 | 1000 | 7 | 3-55 | 518 | JNM05-75 |
| JSH2.5-1200D60221 | 1200 | 7 | 2-25 | 602 | JNM05-90 |
| JSH2.5-1500D60221 | 1500 | 7 | 2-22 | 805 | JNM05-110 |
| JSH2.5-1700D60221 | 1700 | 7 | 2-20 | 805 | JNM05-110 |
| JSH2.5-2000D60221 | 2000 | 5 | 2-20 | 1005 | JNM1-200 |
| JSH2.5-2500D60221 | 2500 | 5 | 2-20 | 1215 | JNM1-250 |
| JSH2.5-3000D60221 | 3000 | 5 | 2-20 | 1450 | JNM1-300 |
| JSH2.5-3500D60221 | 3500 | 5.5 | 2-20 | 1727 | JNM1-320 |
| JSH2.5-4000D60221 | 4000 | 5.5 | 2-20 | 1870 | JNM1-350 |
| JSH2.5 2.57 models · 1,500–5,000 N·m · ratio 25–35 | |||||
| JSH2.5 2.5-1500D60221 | 1500 | 25 | 0.2-20 | 1850 | JNM05-75 |
| JSH2.5 2.5-1700D60221 | 1700 | 25 | 0.2-20 | 2150 | JNM05-90 |
| JSH2.5 2.5-2000D60221 | 2000 | 35 | 0.2-20 | 2065 | JNM05-60 |
| JSH2.5 2.5-2500D60221 | 2500 | 35 | 0.2-20 | 2065 | JNM05-60 |
| JSH2.5 2.5-3000D60221 | 3000 | 27.5 | 0.2-20 | 2035 | JNM05-75 |
| JSH2.5 2.5-3500D60221 | 3500 | 27.5 | 0.2-20 | 2365 | JNM05-90 |
| JSH2.5 2.5-4000D60221 | 5000 | 28.9 | 0.2-20 | 3325 | JNM05-110 |
| JSH36 models · 1,685–5,316 N·m · ratio 5–7 | |||||
| JSH3-1600D60221 | 1685 | 5 | 0-110 | 860 | JNM1-175D60221 |
| JSH3-2000D60221 | 2000 | 7 | 0-80 | 1078 | JNM1-150D60221 |
| JSH3-2600D60221 | 2600 | 7 | 0-80 | 1344 | JNM2-200D60221 |
| JSH3-3400D60221 | 3400 | 5 | 0-100 | 1735 | JNM2-350D60221 |
| JSH3-4000D60221 | 4166 | 5 | 0-90 | 2125 | JNM2-420D60221 |
| JSH3-5300D60221 | 5316 | 5.5 | 0-80 | 2711.5 | JNM2-500D60221 |
| JSH44 models · 4,873–10,886 N·m · ratio 5–5.5 | |||||
| JSH4-5000D120221 | 4873 | 5 | 0-90 | 2430 | JNM3-500D120221 |
| JSH4-6500D120221 | 6562 | 5.5 | 0-90 | 3272.5 | JNM3-600D120221 |
| JSH4-8000D120221 | 7951 | 5 | 0-80 | 3960 | JNM3-800D120221 |
| JSH4-10000D120221 | 10886 | 5.5 | 0-40 | 5428.5 | JNM3-1000D120221 |
| JSH54 models · 13,195–22,136 N·m · ratio 5–5.5 | |||||
| JSH5-13000D90F480221 | 13195 | 5 | 0-40 | 6580 | JNM4-1300D90F480221 |
| JSH5-14000D90F480221 | 14514 | 5.5 | 0-35 | 7238 | JNM4-1300D90F480221 |
| JSH5-20000D90F480221 | 20029 | 5.5 | 0-32 | 9988 | JNM5-1800D90F480221 |
| JSH5-22000D90F480221 | 22136 | 5.5 | 0-30 | 11038.5 | JNM5-2000D90F480221 |
No matching models. The search only covers models that meet the torque/speed condition; clear the condition to search all models. Tell us the torque, speed and mounting interface you need and ask about a custom build.
Showing 9 of 30 models
Click a model to see its full data. Converted values; the metric values govern.
Ratings: JSH2.5 and JSH2.5 2.5 also list maximum torque and motor working pressure (rated / max.); JSH3, JSH4 and JSH5 also list rated pressure, brake data and maximum power. “—” = not listed; please ask us if you need this value.
JSH2.5 2.5
Ratio 25–35High-ratio version, speed 0.2–20 r/min, lower motor working pressure.
- Rated torque
- 1,500–5,000 N·m
- Motor
- JNM05
- Mounting pilot
- φ210f7
JSH3
With brake · 48 kWJNM1 and JNM2 series motors, rated pressure 16 MPa, brake release pressure 2.2–2.6 MPa.
- Rated torque
- 1,685–5,316 N·m
- Static braking torque
- 2,520–7,800 N·m
- Mounting pilot
- φ235f7
JSH4
With brake · 96 kWJNM3 series motor, rated pressure 16 MPa, ports M33x2.
- Rated torque
- 4,873–10,886 N·m
- Static braking torque
- 6,500–15,000 N·m
- Mounting pilot
- φ330f7
JSH5
With brake · 160 kWJNM4 series motor, rated pressure 16 MPa, rated output torque up to 22,136 N·m.
- Rated torque
- 13,195–22,136 N·m
- Static braking torque
- 30,000–39,000 N·m
- Mounting pilot
- φ400f7
Selection guide
Matched to torque, flow and slewing bearing
The notes below apply to all five series; the actual configuration is per the approved drawing.
Output pinion
- Select according to the output torque
- to ensure the strength of the gear and drive shaft
- Common types are listed; pinions can be made to suit your slewing bearing
Distributor
- Select according to the oil flow the system allows
- The distributors listed are common types
- The distributor carries ports A and B and drain port O
Brake & direction
- JSH3, JSH4 and JSH5 have a brake, release pressure 2.2–2.8 MPa
- Oil in at port A and oil in at port B give opposite directions (see end view)
- Other sizes and configurations to customer requirements
Custom builds
Mainly custom-built, designed around your machine
The catalog models are a starting point for selection. Each item below can be designed to the torque, speed and mounting conditions of your equipment.
Torque & ratio
- Five series, rated output torque 1,000–22,136 N·m
- Ratio 5–35, motor displacement matched to speed and flow
- JNM05–JNM4 series motors
Output pinion
- Common pinion modules 4 to 16
- Number of teeth, profile shift coefficient and face width designed to the slewing bearing
- Pinion dimensions in each series' drawings
Mounting & hydraulics
- Mounting pilot, pitch circle and mounting holes to suit the machine
- Distributor (with valves), port size and orientation
- Brake static braking torque and release pressure
Main mounting dimensions of the five series
| Item | JSH2.5 | JSH2.5 2.5 | JSH3 | JSH4 | JSH5 |
|---|
Dimensions in mm; “+ B” means plus the output pinion face width B. Mounting dimensions are per the approved drawing. For the matching motors, see the JNM Series hydraulic motor.
Related products
Related motors and drives
JSH uses a JNM motor with a planetary gearbox; related drive products include the JSC hydraulic transmission unit and the JFB planetary gearbox.
Selection support
Tell us your duty,
we'll confirm the right slewing drive.
Send the information in the checklist and we will check it against the catalog models or assess a custom design. The product catalog and installation drawing are provided once the model and mounting interface are confirmed.
Please include
- 01Required slewing torque and slewing speed
- 02System pressure, flow and control circuit
- 03Module, number of teeth and profile shift coefficient of the slewing bearing gear ring
- 04Mounting pilot, pitch circle, mounting holes and brake requirements